Understanding How Insulation Responds to Water
When it comes to insulation performance in real-world conditions, moisture resistance plays a crucial role. A recent comparative study conducted by Built Environments, Inc. highlights the significant differences between Polyisocyanurate (PIR) and Mineral Wool when exposed to water immersion, drying, and rewetting cycles.
The study, led by Dr. M. Steven Doggett, explores how each insulation type behaves when wet—revealing how material structure directly affects water absorption, drying time, and long-term performance.
Key Findings at a Glance
- Water Absorption
Mineral wool absorbed 8 to 38 times more water than foil-faced PIR and 4 to 19 times more than coated glass-faced PIR. Its open-pore, fibrous structure allows water to penetrate deeply, while PIR’s closed-cell foam design resists absorption effectively. - Drying Performance
PIR panels dried within 24 hours, while mineral wool required 2 to 6 additional days to reach similar dryness levels. The difference stems from PIR’s ability to release moisture vapor quickly across facer-substrate interfaces. - Impact of Rewetting
After rewetting, mineral wool’s water absorption increased by 130% to 190%, and drying times extended by up to four more days. PIR, however, maintained consistent performance even after repeated wetting cycles. - Structural Degradation
Images from the study show that repeated wetting caused fiber separation and void formation in mineral wool slabs, reducing tensile and compressive strength—effects not observed in PIR.
What It Means for Building Design
In modern façade systems where insulation is often installed on the exterior, materials are exposed to fluctuating moisture levels. This study shows that Polyisocyanurate’s closed-cell structure offers superior resilience, making it less prone to water damage and faster to dry—critical for maintaining insulation performance and preventing trapped moisture.
Meanwhile, Mineral Wool, despite its thermal benefits and vapor permeability, may hold water longer, increasing the risk of reduced R-values and prolonged dampness within wall assemblies.
Download the Full Technical White Paper
For architects, engineers, and building professionals seeking detailed data and methodology—including immersion results, rewetting cycles, and visual evidence of material degradation—download the complete white paper below.
Download the Full Study: Comparing Polyiso and Mineral Wool (PDF)